Our ELECTRIX power pack systems feature a 24VDC, DC to AC pure sine wave inverter, 24VDC LFP battery packs with advanced battery management systems (SMART BMS) battery chargers and high quality cables. This modular system allows you to match the capacity needs for each of your productions.
Digital Management Interface—LCD Display delivers battery operating status, voltage, amps, state of charge, time remaining. The display can also read cell voltages at the push of a button for quick diagnostics
State of the art cell management system:
-
- Automatically looks after battery health and operator safety. Low and high cell voltage protection, active temperature monitor, and solid state limiter switch. No contacts to wear out
- USB charge ports – 2 ports @ 2A each for charging electronics. Activated by panel button
- Separate charge port – for charging while in use
- T-Slotted extruded corners – Easy mounting of battery to vehicles
- Batteries are stackable
- Power saving sleep modes – Battery goes to sleep after a prescribed period of no use
- Can be used as stand alone DC supply at 24VDC nominal
- Can supply AC power through our pure sine wave inverters, 3500W continuous
- The ELECTRIX power pack is a high-end power solution for high-end equipment. Safe for all types of 120V power up to 25 Amperes continuous
Electrix 2.5kWh Battery Technical Specs
| CAPACITIES: | |
| Voltage: | 25.6V Nominal |
| Range: | 21-29.2V |
| Capacity: | 100 Ampere hours (2560Wh) |
| Output Ports: | |
| 1x SB175 | 200 Amps Max Battery Voltage |
| 1x SB50 | 50 Amp Max Battery Voltage |
| 2x USB 2.0 | 5V, 2A Each (20W Total) |
| Charging: | |
| SB50 Port | 30A (900W), 3.25 Hours to Full Charge (Under BMS Control) |
| INSTRUMENTATION: | |
| LCD Data Display - 4 Pages of Operating, Diagnostic & Unit ID Data | Page 1: Bar Graph - Percent Remaining, Volts, Amperes, Time Remaining - Minutes (Discharge Mode), Watts (Charge Mode) |
| Page 2: 0-7 Cell Voltages (X.XXX Volts) High and Low Cell (H/L) Balance Activity Indicator (*) |
|
| Page 3: T1-T4 Digital Temp Scale Cell Voltage Imbalance (XX.XXX mV) "Points" Usage Tally Counter |
|
| Page 4: Product Name Serial Number Software Version Model # |
|
| Membrane Panel | Charge, Load Port Control, Backlight Dimming, Page Selection |
| Power Switch | |
| Status LED's | Load, Charge, Alert |
| OPERATING TEMPERATURES: | |
| Charging: | 32°F to 110°F (0°C to 45°C) Do not charge frozen battery! |
| Discharging: | -4°F to 131°F (20°C to 55°C) |
| SAFETY: | |
| Electronic Battery Management System Cell Level Protection, Voltage | |
| Life Cycle Info: | Li-LFP Chemistry, 2000 Cycles @80% Discharge @25°C |
| Dimensions: | 13”W x 12”H x 14.63”L (330mm x 171.5mm x 372mm) |
| Weight: | 71 Lbs. (32.3 kg) |
Electrix 3500W Inverter Technical Specs
| ELECTRICAL INFORMATION: | |
| Output Waveform: | True Sine Wave, 2% THD |
| Input Voltage: | 21-30VDC (Audible Low Voltage Alarm) |
| Output Voltage: | 120VAC +/-2% 60Hz (Others optional) |
| Output Amperes: | 29A AC (3500W) |
| Input Plug: | 2x SB175 Red (Rear Panel) |
| Output Receptacle: | 2x 20A Edison Style (NEMA 5-20R) |
| Input Cable: | 4 feet, 1ga 2 Conductor SB175 Connectors |
| Digital Diagnostics: | LED Flashes Codes for Diagnostics |
| Cooling: | Twin Thermostatically controlled fans |
| Dimensions: | 13”W x 6.75”H x 22.75”L (330mm x 171.5mm x 578mm) |
| Weight: | 31 Lbs (14.1kg) |
| Features: | Sturdy Powder Coated Aluminum case with Extruded Aluminum frame Urethane Stacking Bumpers allow Inverters and batteries to stack securely Collapsible Handles Grounding Lug |